Provides up to 15% savings with light output changes imperceptible to the human eye
- Big savings with the lights "ON".
Works with existing ballasts - No need to discard recently
installed ballasts to save energy.
Reduce lighting bills from 12 - 25% on most fluorescent lighting
systems - Saves money and helps meet curtailment and Demand
Response programs.
One EnerLume|EM® Controls many fixtures - Affordable
solution that is quick and easy to install.
Exclusive software package for programming and monitoring - Provides up to 300 event changes per phase for maximum flexibility and
management of light levels.
Remote programmability - Allows savings levels changes from
any authorized computer.
Simple to operate - Set your savings schedule and forget
it.
Automatic ballast warm-up cycle - Lights start quickly even
on the coldest days,
Voltage monitor detects brownout conditions and automatically
adjusts - Maintains chosen light levels during periods of low voltage.
UL / CUL listed - Meets UL, CUL, NEC, and NEMA
electrical code requirements and safety standards.
Bypass - The EnerLume|EM® is equipped with an electronic bypass. It is accessible only after removing the outer
cover. The cover and panel are equipped with holes for a security seal, This satisfies utility requirements for energy saving devices by preventing use of the bypass except in the event of an equipment failure.
Generator Compatibility - The EnerLume|EM® is
compatible with generators. The EnerLume|EM® adjusts to any sine waves shift caused by the transition from grid to generator or generator to grid.
Computer Connection - The EnerLume|EM® connects to any PC or Laptop via a serial cable via an external RJ-45 jack located on the upper right side of the enclosure.
Control Software - The EnerLume|EM® is controlled with the EnerLume|EM® Energy Manager software provided. This software is
compatible with the Windows® family of operating systems, This software controls each phase independently and allows the user to
program lighting changes as timed events and/or turn all lights associated with each of the phases on and off.
EnerLume|EM®'s revolutionary patent pending technology gives you an advantage over other energy managers in numerous ways.
EnerLume|EM®
Other Energy Managers
Maintains peak voltage
Cuts peak voltage
Senses low voltage conditions and automatically adjusts power levels
Full power unavailable when manager is on
Minimal light level loss
1:1 power reduction to light loss - generally unacceptable and reduces savings potential
Small and compact - weighs as little as 58 lbs. and requires only two people to install
Weighs as much as 300 lbs. much harder to install - requires up to four people
Remote programmable savings levels
Fixed setting on each unit (generally a tapped transformer)
Short IRR's and excellent ROI's
Long IRR's and average ROI's
EnerLume Corporation is a wholly owned subsidiary of EnerLume Energy Management Corp
